Selecting Zone Type - Abus SECVEST 868 Installation Instructions Manual

Note: If you press DELETE until the current name has disappeared
from the display, and then press DELETE once more, the display
leaves the name change screen and restores the name of the zone
to its previous value.

10.3.2 Selecting zone type

After entering the zone name, use the control buttons
Type. Confirm by pressing the control button
Select. To cancel input, press the control button
Back.
If you confirm Type with the Select button, you see the following
graphic display:
Use the control buttons
list of zone types and their attributes, see page 12 of these instructions.
Confirm your selection by pressing the control button
word Select. To cancel input, press the control button
word Back.
21
under the word
under the word
to select the respective zone type. For a
to select
under the
under the