Ip Network; Secure Callback - Abus SECVEST 868 Installation Instructions Manual

10.9.7. IP Network

If you have fitted an Ethernet module to the radio alarm panel, then it
is possible for Downloader to communicate with the radio alarm panel
using the Internet Protocol. This menu allows you to store two IP
addresses that the radio alarm panel can "call" in order to start a
Downloading session. The user starts the call by selecting one of the IP
address.
The options available are:
IP Address 1
Key in the IP Address used by Downloader. The IP address comprises
four groups of digits. Each group is three digits long, and is separated
from the next group by a "dot", for example "192.168.000.001". Press
"*" to key in the dot.
IP Port 1
Key in the port number that Downloader "listens" to on the remote PC
at IP address 1.
IP Address 2
Key in an alternate IP Address used by Downloader.
IP Port 2
Key in the port number used by the alternate IP address.

10.9.8. Secure Callback

Use the control buttons
selection by pressing the control button
cancel input, press the control button
If you confirm Secure Callback with the Select button, you see the
following graphic display:
Use the control buttons
notified of the third callback number (independent of the telephone
numbers in the Downloading, Phone Book option) of the remote
maintenance PC. In this case, the user cannot see the callback
number. The callback number can be changed at any time by the
remote maintenance PC. To select Secure Callback, press the control
button under the word Select. To cancel input, press the control
button under the word Back.
Before making a Downloader connection, the remote PC operator keys
in the third callback number. Once connected Downloader transmits
the number to the radio alarm panel. The radio alarm panel then uses
that number to call back to the remote PC.
58
to select Secure Callback. Confirm your
under the word Select. To
under the word Back.
to select whether the panel is to be