Abus SECVEST 868 Installation Instructions Manual page 89

10.12.1. Testing local siren
to select Siren. Confirm your selection by
Use the control buttons
pressing the control button
input, press the control button
If you confirm Siren with the Select button, you see the following
graphic display:
Activate the siren by pressing the control button
On/Off. To cancel input, press the control button
Back.
If you confirm the display On/Off, the internal siren is activated. You
should now be able to hear the alarm tone. In the upper right corner of
the display, the word ON appears. You see the following graphic
display:
To end the test, select On/Off again.
under the word Select. To cancel
under the word Back.
under the word
under the word
10.12.2. Testing the loudspeaker
Use the control buttons
selection by pressing the control button
cancel input, press the control button
If you confirm Loudspeaker with the Select button, you see the following
graphic display:
Activate the loudspeaker by pressing the control button
the words Play/Stop. To cancel, press the control button
the word Back.
If you confirm the display Play/Stop, the loudspeaker is activated. You
should now be able to hear the voice messages. In the upper right
corner of the display, the word Playing appears. You see the following
graphic display:
To end the test, select Play/Stop again.
89
to select Loudspeaker. Confirm your
under the word Select. To
under the word Back.
under
under