10.4.2 Defining output name
Select Name with Select and you see the following graphic display:
The cursor flashes at the last character. Use the control key
move the cursor to the left or the right. To delete a letter, press the
under the word Delete. To save your input, press
control button
under the word OK.
the control button
Enter letters via the keypad. Letter-to-key assignment:
10.4.3 Selecting output type
NOTE: In this menu you have also the option to set and unset the panel
at a certain time automatically. Please see the note on the next page
(output type user defined).
After entering the output name, use the control buttons
Type. Confirm by pressing the control button
Select. To cancel input, press the control button
Back.
to
If you confirm Type with the Select button, you see the following
graphic display:
Use the control buttons
list of output types and their attributes, see Table 7 on the right. Confirm
your selection by pressing the control button
Select. To cancel input, press the control button
Back.
27
under the word
under the word
to select the respective output type. For a
under the word
under the word
to select