Table of Contents
Advertisement
If you have fitted an GPRS module then this menu allows you to give
the radio alarm panel its own IP (Internet Protocol) address, ready for
use with IP Alarm Reporting or IP Downloading.
Before programming radio alarm panel please make sure that you
have obtained the necessary information from your GPRS Service
Provider and ARC .
The menu contains the following options:
IP Address
Leave blank.
IP Port Number
Leave blank.
Note: When delivered from the factory, the radio alarm panel contains
no IP address; it can, however, obtain its own IP address from the
service provider. Once you have completed the first connection via
GPRS, you can see what IP address the radio alarm panel has by
selecting the
System Config - About Comms - IP Address option from the Operating
menu.
GPRS APN (Access Point Name)
Key in the text of the access point name.
GPRS Username
Key in your GPRS user name.
GPRS Password
Key in your GPRS password.
10.9. Configure download settings
In the installer menu, use the control buttons to select the fifth menu
item.
You see the following graphic display:
Select this menu item by pressing the control button
word Select.
You see the following graphic display:
Use the control buttons
and their attributes, see Table 16 on the right. Confirm your selection by
pressing the control button
input, press the control button
53
to select a function. For a list of functions
under the word Select. To cancel
under the word Back.
under the
Advertisement
Table of Contents
