Chapter 6 Programming The Abus Wireless Alarm System; Chapter 7 Settings In Installer Menu; Introduction To Installer Menu - Abus WIRELESS ALARM SYSTEM Installation Instructions Manual

Chapter 6 Programming the ABUS wireless alarm system

There are several ways of programming your ABUS wireless alarm system:
•
At the alarm system using the keypad
•
At the alarm system using the PC software
•
Remotely, using a telephone link and PC software

Chapter 7 Settings in installer menu

This chapter describes the options and features of the installer menu of your ABUS wireless alarm system. The following is an
overview of the main menu options according to their sequence in the installer menu:
1 1
System, page 7-23
2 2
Zones, page 7-37
3 3
Outputs, page 7-51
4 4
Codes, page 7-57
5 5
Dialer, page 7-63
6 6
Not active
7 7
Key-fobs, page 7-71
8 8
Keypads, page 7-74
9 9
Sounder, page 7-74
0 0
Exit, page 7-75

7.1 Introduction to installer menu

The following pages describe the menu options for programming using the buttons of your ABUS wireless alarm system. For
programming the ABUS wireless alarm system with the Downloader Software, see the separate software instructions.
To access the installer menu, deactivate the ABUS wireless alarm system, press the star button followed by 9, followed by 1.
9 9 1 1
You are asked to enter the installer code for the installer menu. If this has not been changed from the factory default, it is 0133. Enter
this code and confirm by pressing the lozenge button.
0 0 1 1 3 3 3 3
You are now in the installer menu.
You can reach the items of the installer menu by scrolling with the
option, confirm by pressing
the digits assigned to the menu option, e.g.: for menu option 111 (stands for Entry delay), press
by pressing three times.
These instructions are shown in columns, explained in the following table:
Column header
Quick-Key
Parameter
Default
Range
7-22
. To exit a menu option, press
Description
The Quick-Key function is a button sequence to be pressed to reach a menu option directly. It is listed in
numerical order.
Name and explanation of the menu option to be programmed.
The default factory values. The selected values are suitable for most standard applications.
The options you can select for the menu item.
buttons. When you reach the required menu
. It is faster if you use the Quick-Key function. You simply enter
1 1 1 1 1 1
Return to the main menu
.