Abus SECVEST 868 Installation Instructions Manual page 70

10.10.1.12. Force Test Call Now
Use this option to make the radio alarm panel start a test call
immediately.
Use the control buttons
your selection by pressing the control button
Select. To cancel input, press the control button
Back.
to select Force Test Call Now. Confirm
under the word
under the word
10.10.1.13. Dynamic Test Call
Use the control buttons
selection by pressing the control button
cancel input, press the control button
If you confirm Dynamic Test Call with the Select button, you see the
following graphic display:
Use the control buttons
test call every 24 hours. If the function is enabled, the call is made
every 24 hours following the last transmission. Select a function and
confirm it by pressing the control button
cancel input, press the control button
NOTE: The dynamic test call has the advantage that the panel only
makes a test call if within the last 24 hours the panel has not sent any
transmission. E.g. if you transmit set/unset, it may happen that the
panel never makes a test call as it already transmits one information
per day.
70
to select Dynamic Test Call. Confirm your
under the word Select. To
under the word Back.
to select whether the panel is to make a
under the word Select. To
under the word Back.