Table of Contents
Advertisement
Function
Meaning
Account Name
The account name is defined by the download
software to guarantee a secure connection.
The account name is displayed when it is
entered.
Connection Type
Defines whether the connection is direct via USB
cable or telephone.
Ring to Answer
If the analogue line is not used exclusively for
remote maintenance, the setting defines when
the radio alarm panel accepts the call.
Answer on 1 ring
If this function is enabled, the call to remote
maintenance is in two steps. The software calls
the radio alarm panel and waits for two rings.
The panel now waits for a second call and
accepts this call immediately.
Access mode
Defines what type of connection setup is to be
made by telephone.
Phone Book
Enter two numbers here. One is used for secure
callback.
IP Network
If you have fitted an Ethernet/GPRS module to
the radio alarm panel, then it is possible for
Downloader to communicate with the radio
alarm panel using the Internet Protocol.
Secure Callback
Enable this function to start connection setup
by the radio alarm station.
Modem Baud Rate
Sets the baud rate of the modem on the PC
that performs remote maintenance.
10.9.1. Account Name
Use the control buttons
selection by pressing the control button
cancel input, press the control button
If you confirm Account Name with the Select button, you see the
following graphic display:
If no account name is entered here by the software, nothing is
displayed here.
54
to select Account Name. Confirm your
under the word Select. To
under the word Back.
Advertisement
Table of Contents
