Abus SECVEST 868 Installation Instructions Manual page 75

10.10.2.4. Account numbers
Use the control buttons to select Account Numbers. Confirm your
selection by pressing the control button
cancel input, press the control button
If you confirm Account Numbers with the Select button, you see the
following graphic display:
Use the control buttons
to change. To select an account number, press the control button
under the word Select. To cancel input, press the control button
under the word Back.
Enter the account number that you have received for transmitting from
the station.
Select Reporting, Social Care, Account Numbers to store any account
numbers that you wish the radio alarm panel to communicate during a
social care alarm call.
For social care reporting an account code can be up to eight
characters long (digits and letters).
When using Scancom or Scanfast report types (see below) the radio
alarm panel uses the last four to six characters of the account code. If
you key in four characters then the radio alarm panel uses only those
four characters. If you key in five characters then the radio alarm panel
pads the number of digits out to six by adding leading zeros.
When using Tunstall report type the radio alarm panel adds leading
zeros to make shorter account codes eight characters long.
under the word Select. To
under the word Back.
to select the account number you want
10.10.2.5. Report Type
Use the control buttons
selection by pressing the control button
cancel input, press the control button
If you confirm Report Type with the Select button, you see the following
graphic display:
Use the control buttons
types and their attributes, see the table below. Confirm your selection
by pressing the control button
input, press the control button
After sending the alarm according to the selected digital report type,
the panel opens a two-way audio channel. Select DTMF for the audio
connection. Depending on the report type selected, various functions
are available.
Function SCANCOM
Speaking DTMF tone "2"
Listening DTMF tone "1"
Switching DTMF tone "*"
Confirm call DTMF tone "5"
Play back basic DTMF tone "3"
message
Table 21: Audio control for social calls
75
to select Report Type. Confirm your
under the word Select. To
under the word Back.
to select a report type. For a list of report
under the word Select. To cancel
under the word Back.
SCANFAST TUNSTALL
Not available DTMF "C"
Not available DTMF "*"
Not available Not available
Not available DTMF "# "
Not available Not available