Table of Contents
Advertisement
If instead of the above display you see the following:
this detector has already been trained for another zone. Conduct a
walk test to find out which zone this detector has been trained for.
IMPORTANT: It may happen that you see this display after teaching
the detector for the first time and after receiving the
learning confirmation message, since the detector sends
its signal more than once. In this case, the display is
meaningless.
10.3.5.2 Delete All
If you confirm Delete All, you see the following graphic display:
Confirm that you want to delete all zones by pressing the control
under the word Yes. To cancel input, press the control
button
button
under the word Back.
If you confirm Delete All, you first see the following display:
and if deletion is successful:
Now all detectors and zone attributes have been deleted.
10.3.5.3 Training a zone manually
You see the following graphic display:
Select a zone and confirm with Select to teach a detector. You receive
the same displays as for Auto learn (see Page 14).
25
Advertisement
Table of Contents
