Abus SECVEST 868 Installation Instructions Manual page 82

Function Meaning
Call Mode Setting for transmitting text messages (SMS)
Primary Telecoms You must use this option to select which
route the radio alarm panel will pick first for
sending reports.
Messages Enter the text message via the keypad.
Phone Book For entering phone numbers to which SMS
messages are to be sent
SMS Triggers For assigning an SMS text message to one or
more events
If you do not have a GSM module fitted, but
PSTN SMS
are sending SMS messages by way of the
PSTN line, then you must program some
extra information under this menu.
10.10.4.1. Call Mode
This option enables or disables SMS reporting. To employ SMS
reporting set the call mode to "Enabled".
10.10.4.2. Primary Telecoms
Press the control button
confirm by pressing the control button
cancel input, press the control button
After selecting PRIMARY TELECOMS with Select, you see the following
graphic display:
Use the control buttons
This transmission method is used as long as transmission is possible with it.
Confirm your selection by pressing the control button
word Select. To cancel input, press the control button
word Back.
82
to select PRIMARY TELECOMS and
under the word Select. To
under the word Back.
to select the primary transmission method.
under the
under the