Table of Contents
Advertisement
10.9.9. Modem Baud Rate
Press the control button
by pressing the control button
input, press the control button
If you confirm Modem Baud Rate with the Select button, you see the
following graphic display:
Use the control buttons
communications. If you do not know the baud rate of your modem,
select Auto. The panel sets the baud rate automatically. If the
connection is bad, you should set a lower baud rate. Set the value to
300. To confirm this setting, press the control button
word Select. To cancel input, press the control button
word Back.
to select Modem Baud Rate and confirm
under the word Select. To cancel
under the word Back.
to select the baud rate (bps) for
10.10. Configuring communication settings
In the installer menu, use the control buttons to select the sixth menu
item.
You see the following graphic display:
Select this menu item by pressing the control button
word Select.
You see the following graphic display:
under the
under the
Use the control buttons
and their attributes, see Table 18 on the right. Confirm your selection by
pressing the control button
input, press the control button
59
to select a function. For a list of functions
under the word Select. To cancel
under the word Back.
under the
Advertisement
Table of Contents
