Siren Time; Stray On Entry Route Delay - Abus SECVEST 868 Installation Instructions Manual

10.7.10. Siren Time

Use the control buttons
selection by pressing the control button
cancel input, press the control button
If you confirm Siren Time with the Select button, you see the following
graphic display:
Use the control buttons to select how long the siren is to sound if a
local or external alarm is triggered. To select a siren time, press the
under the word Select. To cancel input, press the
control button
control button under the word Back.
to select Siren Time. Confirm your
under the word Select. To
under the word Back.

10.7.11. Stray on Entry Route Delay

Press the control button
confirm by pressing the control button
cancel input, press the control button
If you confirm Stray on Entry Route Delay with the Select button, you
see the following graphic display:
Use the control buttons
extra 30 seconds after exceeding the entry delay time or strays from an
entry route zone before an external alarm is sounded. If you enable this
function, only an internal alarm is triggered after expiry of the entry
delay time. If you disable this function, an external alarm is triggered
immediately after expiry of the entry delay time. To select a function,
press the control button
press the control button
(This option is available to provide compliance with EN 50131-1.)
48
to select Stray on Entry Route Delay and
under the word Select. To
under the word Back.
to select whether to allow the user an
under the word Select. To cancel input,
under the word Back.