Table of Contents
Advertisement
10.12. Test function
In the installer menu, use the control buttons to select the eighth menu
item.
You see the following graphic display:
Select this menu item by pressing the control button
word Select.
You see the following graphic display:
Use the control buttons
to select a function. For a list of functions
and their attributes, see the table on the right. Confirm your selection
by pressing the control button
input, press the control button
under the
under the word Select. To cancel
under the word Back.
Function
Meaning
Siren
Tests the function of the local siren in the alarm
station.
Loudspeaker
Tests the function of the local loudspeaker in
the alarm station.
Keypad
Tests the keypad input function.
Walk Test
Go through each programmed detector to test
its function.
Detector strengths
Tests the signal strength of trained detectors.
Ext. Siren Signals
Tests the signal strength of the external sirens
WAMs Signals
Tests the signal strength of WAMs
Arm Station Signals
Tests the signal strength of arking stations
Outputs
Tests the outputs when you activate them
manually.
Telecommands
Tests the button functions and the owner of the
programmed telecommands.
Pendants
Tests the function of the pendants.
Panic Alarms
Tests the function of the panic button.
Tags
Tests the function of the proximity tag.
88
Advertisement
Table of Contents
