Abus SECVEST 868 Installation Instructions Manual page 78

10.10.3.1. Call Mode
This option enables or disables the speech dialler feature. To employ
speech dialling set the call mode to "Enabled".
10.10.3.2. Primary Telecoms
Press the control button
confirm by pressing the control button
cancel input, press the control button
After selecting PRIMARY TELECOMS with Select, you see the following
graphic display:
Use the control buttons to select the primary transmission method.
This transmission method is used as long as transmission is possible with it.
Confirm your selection by pressing the control button
word Select. To cancel input, press the control button
word Back.
10.10.3.3. Messages
Use the control buttons
selection by pressing the control button
cancel input, press the control button
to select PRIMARY TELECOMS and
under the word Select. To
under the word Back.
under the
under the
to select Messages. Confirm your
under the word Select. To
under the word Back.
If you confirm Messages with the Select button, you see the following
graphic display:
Use the control buttons
and their attributes, see the table below. Confirm your selection by
pressing the control button
input, press the control button
Function Meaning
Home Message Select this function and follow the instructions in
(approx. 10 sec). the display. This message is played back at
every voice message transmission. Record the
data for the location of the alarm panel (name,
address, city).
Message 1–4 Recording of messages for different events 4
(approx. 3 sec). messages are available. You can for example
record "Fire alarm!" or "Burglar alarm".
You need to record at least the home message and on event triggered
message. Do not forget to save the message following recording.
78
to select a function. For a list of functions
under the word Select. To cancel
under the word Back.