CHAPTER 6 TROUBLESHOOTING
5.1.1 Pickup Assembly
Pickup assembly
1) Is the paper curled or wavy?
YES: Replace the paper.
2) Try paper of a recommended type. Is the problem corrected?
YES: Advise the user to use paper of a recommended type.
DC controller PCB, Pickup clutch
3) During printing operation, does the pickup roller of the selected
NO:
Pickup roller, Guide plate
4) Is the pickup roller deformed or worn?
YES: Replace the pickup roller.
NO:
6-152
Advise the user on the correct method of storing paper.
source of paper (cassette, deck, manual feed tray) rotate?
See the discussions under each fault.
Check the guide plate for deformation.
COPYRIGHT© 2001 CANON INC.
2000 2000 2000 2000
CANON iR8500/7200 REV.1 AUG. 2001