Canon iR8500 Service Manual page 280

c. Removing the HV-DC PCB
1) Remove the rear cover (See 10.4.1.e.).
2) Disconnect the 5 connectors [1], and
remove the 3 screws [2]; then, slide the
HV-DC PCB [3] along the left and right
rails [4] to detach to the front.
3) Detach the HV-DC PCB [3] from the
cut-offs of the rails.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[2]
[1]
[4]
[1]
F02-1004-88
[3] [4]
[2]
[1]
2-225