Canon iR8500 Service Manual page 746

PH-D-EL
Use it to select the number of lines for photo mode printing.
Setting 0: 141 lines (default)
1: 134 lines
COPY-JOB
Use it to prevent auto copy start when a coin robot and a card reader.
Setting 0: copy job auto start selected (default)
1: copy job auto start not selected
OP-SZ-DT (Indicated if iR7200)
Use it to turn on and off the original size detection mechanism in book
mode.
Setting 0: OFF (accepts input of original size from control panel; default)
1: ON (detects original size automatically)
NW-SCAN
use it to enable/disable the network scanning function.
Memo
Setting 0: disable (default)
1: enable
INS-C/S
Use it to expand the inserter function.
Setting 0: support cover only (default)
1: support cover + interleaf (multi inserter)
TBIC-RNK
Use it to reduce uneven intervals.
Setting 1 to 5 (default: 1)
ORG-ODR (Indicated if iR8500)
Use it to set the sequence of reading double-sided original when original
orientation detection is enabled.
Setting 0: read from back to face (default)
1: read from face to back
COPYRIGHT© 2001 CANON INC.
• The setting cannot be changed for the 100V model.
• For the 208/230V model, the setting can be changed; for the PS/
PCL model, fixed to '1'.
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
SERVICE MODE
COPIER>OPTION
S-103