Canon iR8500 Service Manual page 732

P-TR-EXP
Use it to check the activation of the pre-transfer exposure lamp.
<Using the Mode>
1) Select the item, and press the OK key.
•
2) See that the pre-transfer exposure lamp will go OFF in several sec.
LBL-PRNT
Use it to print out the service label.
<Using the Mode>
1) Place paper in the manual feed tray.
2) Select the item, and press the OK key.
•
•
PRE-EXP
Use it to check the activation of the pre-exposure lamp.
<Using the Mode>
1) Select the item, and press the OK key.
•
2) See that the machine will automatically go OFF after remaining for sev-
<SYSTEM>
Use it to check system-related operations.
DOWNLOAD
Use it to switch the system program to download mode.
<Using the Mode>
1) Turn off the machine and the PC.
2) Disconnect the network-related cable for the machine.
3) Connect the machine and the PC using a bi-Centronics cable or a net-
4) Turn on the PC.
5) Turn on the machine.
6) Select the item, and press the OK key.
7) Download using the Service Support Tool (See Chapter 6 "Trouble-
8) When done, turn off and then on the main power switch.
COPYRIGHT© 2001 CANON INC.
The pre-transfer exposure lamp will go ON.
When printing the service label, be sure always to use the manual
feed tray.
The service label will be printed out.
Keep the generated service label in the service book case behind the
front cover.
The pre-exposure lamp will go ON.
eral sec.
Use it when downloading the systems program.
work cable.
shooting">7 "Upgrading").
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
SERVICE MODE
COPIER>FUNCTION
S-89