Canon iR8500 Service Manual page 650

<VERSION>
Indicates the ROM versions of the PCBs used in the machine and accessories.
Indication <xx,yy>
DC-CON
Indicates the ROM version of the DC controller PCB.
R-CON
Indicates the ROM version of the reader controller PCB.
PANEL
Indicates the ROM version of the control panel CPU PCB.
FEEDER
Indicates the ROM version of the ADF controller.
SORTER
Indicates the ROM version of the finisher controller PCB.
NIB
Indicates the version of the network interface board.
PS/PCL
Indicates the version of the software (PS/PCL).
LIPS
Indicates the version of the printer board (LIPS).
SDL-STCH
Indicates the ROM version of the saddle stitcher controller PCB.
MN-CONT
Indicates the version of the software of the main controller PCB.
RIP1
Not used.
BOOT-ROM
Indicates the BOOT ROM version of the main controller assembly.
DIAG-DVC
Indicates the version f the self diagnostic device.
RUI
Indicates the version of the RUI.
COPYRIGHT© 2001 CANON INC.
xx: version number
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
COPIER>DISPLAY
yy: R&D control number
SERVICE MODE
S-7