Canon iR8500 Service Manual page 687

SERVICE MODE
COPIER>I/O
<SORTER (4/12)>
Address bit
P010 0 staple absent detection
1 READY detection
2 tray B approach detection
3 door 24V power-down detection
4 feed path paper detection 1
5 feed path paper detection 2
6 feed path paper detection 3
7 feed path paper detection 4
P011 0 inserter cover open /closed detection
1 stack wall safety detection
2 inserter unit detection
3 puncher unit detection
4 paper folding unit detection
5 saddle unit detection
6 stapler interference sensor connection
detection
7 fan rotation error detection
P012 0 swing motor high speed setting
1 swing motor medium speed setting
2 swing motor low-speed setting
3 swing motor ON*
4 power supply fan ON signal
5 buffer motor ON signal
6 buffer motor current swing
7 trailing edge solenoid ON
P013 0 stack delivery motor CW*
1 stack delivery motor ON*
2 stack delivery start-up current switch
3 front aligning plate motor ON
4 rear aligning plate motor ON
5 tray auxiliary plate motor A
6 tray auxiliary plate motor B
7 tray auxiliary plate motor ON
P014 0 knurled belt motor phase A
1 knurled belt motor phase B
2 knurled belt motor ON
3 paddle motor A
4 paddle motor B
5 paddle motor ON
6 folder motor gain switch
7 not used
S-44
Description
COPYRIGHT© 2001 CANON INC.
Notation
1: staple absent,
0: staple present
1: NO, 0: ready
0: ON
1: down
PI76 1: paper present
S7 1: paper present
S8 1: paper present
PI75 1: paper present
1: open
1: error
1: absent, 0: present
1: absent, 0: present
1: absent, 0: present
1: absent, 0: present
1: connected
1: error, 0: normal
M8 1: ON
M8 1: ON
M8 1: ON
M8 1: OFF, 0: ON
FM1 1: ON, 0: OFF
M2 1: OFF, 0: ON
M2 1: constant, 0: speed up
SL5 0: ON
M7 1: CCW, 0: CW
M7 1: OFF, 0: ON
1: up, 0: down
M4 1: OFF, 0: ON
M5 1: OFF, 0: ON
1: OFF, 0: ON
M20
M20
M20 1: OFF, 0: ON
M9
M9
M9 1: OFF, 0: ON
M71 1: high speed, 0: low speed
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
Remarks