Canon iR8500 Service Manual page 275

CHAPTER 2 NEW FUNCTIONS
h. Removing the HV-AC PCB
1) Remove the rear cover (See 10.4.1.e.).
2) Disconnect the 2 connectors [1], and
remove the 4 screws [2]; then, detach
the HV-AC PCB [3].
i. Removing the All Night Power Supply PCB
1) Remove the left lower cover (4 screws),
and remove the left upper cover (9
screws).
2) Disconnect the connector [1], and re-
move the 6 screws [2]; then, detach the
delivery anti-adhesion fan mounting
case [3].
2-220
COPYRIGHT© 2001 CANON INC.
[2] [1] [3]
F02-1004-78
[3]
[2]
F02-1004-79
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
[1] [2]
[2]
[1]