Canon iR8500 Service Manual page 222

5) Remove the E-ring [1], one-way gear
[2], and bearing [3] at the rear of the ex-
ternal roller shaft; then, remove the 2 E-
rings [4] and the 2 rollers [5] of each
roller.
Take care not to lose the parallel
pin used in each roller.
b. Removing the Internal Delivery Roller
1) Remove the fixing assembly.
2) Remove the internal delivery roller [1],
bearing [2], 3 E-rings [3], and bushing
holder [4]; then, detach the drive gear
[5].
3) Remove the E-ring [1] and the bushing
[2] at the rear of the shaft; then, detach
the internal delivery roller [3].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[5]
[4]
[3]
F02-909-26
[4]
[1]
[2]
F02-909-27
[1]
F02-909-28
[5]
[4]
[2]
[1]
[3]
[5]
[3]
[3]
[2]
2-167