Others - Canon iR8500 Service Manual

2.9.4 Others

a. Removing the Original Size Sensor 1/2
1) Remove the copyboard glass (See
2.9.1.a.).
2) Move the No. 1 mirror base to the right
edge.
3) Remove the 2 screws [1], and discon-
nect the connector [2]; then, detach the
original size sensor unit (front) [3].
4) Disconnect the connector [1] (1 pc.
each), and detach the original size sen-
sor 1/2 [2].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[1] [3]
F02-209-34
[2]
[1]
F02-209-35
[2]
[2]
2-33