Canon iR8500 Service Manual page 781

ERROR CODE
E025
Main cause The toner feed motor (M6) inside the cartridge is faulty. The DC controller
PCB is faulty.
Condition
0000 An overcurrent flows for 10 secs or more twice to the toner feed
E032
Main cause The copy data controller/NE controller is faulty. The main controller PCB is
faulty.
Condition
0000 The copy data controller/NE controller is disconnected (after it has
E043
Main cause The side paper deck main motor (M101) is faulty. The side deck driver PCB
is faulty. The DC controller PCB is faulty.
Condition
0000 The PLL lock signal (DMPLK) does not arrive for 2 secs after the
E051
Main cause The horizontal registration sensor (PS18) is faulty. The horizontal registra-
tion motor (M15) is faulty. The DC controller PCB is faulty.
Condition
0000 The home position signal is not detected within 5 secs while the
E-6
motor (M6) inside the cartridge (detected by the DC controller
PCB; upon detection for the first time, it indicates the message
"Shake Toner Bottle and Set").
been connected once).
side paper deck main motor drive signal is generated.
horizontal registration motor (M15) drive signal is generated.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001