No.
8
Take out the 2 slope plates [2] from the
middle of the skid [1].
9
Remove the 2 pins [2] taped in place to
the slope plate [1].
Turn over the slope plate [1], and fit the
pin [2] (1 pc. each) while matching the
pin holes in the skid and the pin hole in
the slope plate.
Holding the grips (front, rear) on the de-
livery side of the copier, slide the machine
along the slope plates, then off the skid.
10
Take out the parts and attachments from
the cardboard box that comes with the
machine; then, check to make sure that
none of the foregoing items is missing.
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000
CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[1]
F04-202-08
[2]
F04-202-09
[2]
[1]
4-9