Canon iR8500 Service Manual page 779

ERROR CODE
E005
Main cause The fixing web has been taken up. The fixing web length sensor (PS7) is
faulty. the DC controller is faulty.
Condition
0000 The length of the fixing web that has been taken up exceeds a spe-
Caution You must replace the fixing web, and clear the two web counters in service
mode: COPIER>COUNTER>MISC>FIX-WEB and COPIER>
COUNTER>DRBL-1>FIX-WEB.
E010
Main cause The main motor (M1) is faulty. The DC controller PCB is faulty.
Condition
0000 Clock pulses do not arrive for 2 secs or more after the main motor
E012
Main cause The drum motor (M0) is faulty. The DC controller PCB is faulty.
Condition
0000 Clock pulses do not arrive for 2 secs or more after the drum motor
E013
Main cause The waste toner feedscrew is faulty. The waste toner clog detecting switch
(MSW2) is faulty. The DC controller PCB is faulty.
Condition
0000 The waste toner feedscrew cannot rotate, and the switch (MSW2)
E-4
cific value, and the fixing web length sensor (PS7) detects the ab-
sence of the web for 5 secs or more.
drive signal is generated.
drive signal is generated.
is pushed multiple times within a specific period of time.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001