Canon iR8500 Service Manual page 85

CHAPTER 2 NEW FUNCTIONS
e. Removing the Reader Controller PCB
1) Remove the original size sensor (See
2.9.4.a.b.).
2) Remove the reader controller cover (See
2.9.4.h.).
3) Disconnect all connectors on the Reader
Controller PCB.
4) Disconnect the DDIS cable [1] and the
2 flexible cables [2]; then, remove the 9
screws [3] and the stepped screw [4], to
detach the reader controller PCB [5] in
the direction of the arrow.
2-30
COPYRIGHT© 2001 CANON INC.
[3] [3]
[1]
[3]
[3]
[3]
F02-209-31
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
[3] [3] [2]
[4] [3] [5]
[3]