After Replacing The Scanning Lamp; Removing The Scanner Motor - Canon iR8500 Service Manual

3.9.4 After Replacing the Scanning Lamp

Execute 'CCD auto adjustment' in service mode, and record the updated CCD adjustment
data on the service label.
1. CCD Auto Adjustment
COPIER>FUNCTION>CCD>CCD-ADJ
2. CCD Adjustment Data all items under
COPIER>ADJUST>CCD

3.9.5 Removing the Scanner Motor

1) Remove the reader rear cover.
2) Remove the reader controller PCB (See
5.4.2.a.).
3) Remove the screw [1], and detach the
ADF base (right) [2].
4) Remove the five screws [3], and detach
the motor cover [4].
5) Remove the two springs [1], and re-
move the three screws [2]; then, while
shifting the motor unit [3] in the direc-
tion of the arrow, detach the belt.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[2]
[4]
[3]
F02-309-06
[1]
[2]
[1]
[3]
F02-309-07
[1]
[3]
[2]
2-61