Canon iR8500 Service Manual page 738

DRM-IDL
Use it to set idle rotation mode of the photosensitive drum at power-on.
Memo
Setting 0: do not execute idle rotation (default)
1: execute idle rotation for 30 sec if absolute moisture content is 18 g or
more
2: execute idle rotation for 2 min if absolute moisture content is 18 g or
more
3: execute idle rotation for 30 sec regardless of environment
4: execute idle rotation for 2 min regardless of environment
FX-FANSW
Use it to switch fixing heat discharge fan control.
Memo
Setting 0: Full speed (default)
1: Half speed
CONFIG
Use it to select multiple pieces of firmware stored on the hard disk to switch
between countries, languages, destinations, and paper sizes.
Setting XXYYZZAA
XX: country, YY: language, ZZ: destination, AA: paper size configura-
tion. The mode of indication is as selected by
COPIER>DISPLAY>USER>LANGUAGE.
<Using the Mode>
1) Select CONFIG.
2) Select the item to change to highlight, and press the +/- key.
3) See that each press on the +/- key changes the indications in sequence.
4) Bring up the appropriate description for all items, and press the OK key.
5) Turn off and then on the main power switch.
SHARP
Use it to change the sharpness level of the image.
• A higher setting makes the image sharper.
Setting 1 to 5 (default: 3)
FDW-DLV
Use it to set face-down delivery for multiple-page printing.
Setting 0: normal (face-up delivery for all if for single original)
1: face-up delivery for one set of prints of single original; face-down de-
livery for multiple sets (default)
COPYRIGHT© 2001 CANON INC.
By initiating idle rotation of the photosensitive drum, fusion of toner
to the drum may be avoided. Set it to 1 through 4 if the images are
distorted or too light.
Setting it to '1' will use half-speed control for the fan after copying/
printing.
The items that may be changed are XX (00; country) and AA (00; pa-
per size configuration).
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
SERVICE MODE
COPIER>OPTION
S-95