Canon iR8500 Service Manual page 277

CHAPTER 2 NEW FUNCTIONS
3) Disconnect the connector [1], and re-
move the 2 rocking support [2] then de-
tach the bi-Centronics PCB [3].
k. Removing the Relay PCB
1) Remove the left lower cover (4 screws).
2) Disconnect the connector from the
PCB; then, remove the screw [1], and
detach the relay PCB [1] from the four
PCB holders [2].
2-222
COPYRIGHT© 2001 CANON INC.
[2]
F02-1004-82
[2]
[2]
F02-1004-83
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
[1]
[3]
[1]
[2]
[2]