4) If the notation in the upper right of the screen is 'High-Speed', go to step 6); if 'Low-
Speed', go to step 5).
5) Click 'Switch operation mode' to bring up the Centronics Communication Mode
Change screen. Select 'High-Speed', and press 'OK' to move to step 6).
High-speed mode is not supported on Windows NT and Windows 2000.
Memo
COPYRIGHT© 2001CANON INC.
F06-703-03
F06-703-04
2000 2000 2000 2000
CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 6 TROUBLESHOOTING
6-193