Canon iR8500 Service Manual page 249

CHAPTER 2 NEW FUNCTIONS
c. Removing the Control Panel Controller (CPU) PCB and the Control Panel In-
verter PCB
1) Remove the 4 mounting screws [1], dis-
connect the 5 connectors [2], and dis-
connect the 2 flat cables [3]; then, de-
tach the control panel controller (CPU)
PCB [4].
2) Remove the 3 screws, and detach the
control panel lower cover [2].
3) Disconnect the 3 connectors [1], and
free the harness from the harness guide
[2].
4) Remove the 4 screws [3], and detach the
control panel inverter PCB [4].
2-194
COPYRIGHT© 2001 CANON INC.
[3] [1] [4]
[1] [2]
F02-1004-25
[1]
F02-1004-26
[2] [3] [1] [3] [1]
[4] [3] [1]
F02-1004-27
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
[1] [2]
[1]
[2] [1]
[3]