Canon iR8500 Service Manual page 303

CHAPTER 4 INSTALLATION
7. Install the machine in a well-ventilated area.
If multiple machines exist, make sure that the exhaust of one sill not be drawn into an-
other.
Do to place the machine to block the air inlet of the room.
In general, the silicone gas (silicone oil evaporating from the fixing assembly) gener-
ated by a copier tends to soil the corona charging wire, reducing the life of the charging
wire. This is particularly true of a low-humidity environment.
4-2
Exhaust
Wrong 1
F04-100-01
Wrong 2
F04-100-02
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001