Installing The Network Lips Printer Kit -B1; Installing The Network Lips - Canon iR8500 Service Manual

7 Installing the Network LIPS Printer Kit -B1

7.1 Installing the Network LIPS Printer Kit-B1
To use this Kit, the version of the host's system software must be 2.20 or
later. Start service mode, and make the following selections to check its ver-
sion: COPIER>DISPLAY>VERSION>MN-CONT. If the indication is not
2.20 or later, be sure to download an appropriate version.
No.
1 Turn off the copier's power switch, and
disconnect the power plug.
2 Remove the 10 screws [1], and detach the
rear cover [2].
3 Remove the interface cable [1].
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[1]
[1]
F04-701-01
F04-701-02
[2]
[1]
4-69