Canon iR8500 Service Manual page 455

CHAPTER 6 TROUBLESHOOTING
7) Put the developing assembly and the process unit back into their initial positions.
8) Connect the connector [1] of the potential sensor.
9) Fit the potential sensor checking electrode (FY9-3041) [2] to the potential sensor [1].
When mounting the potential sensor checking electrode to the potential sen-
sor, take care so that the magnet of the checking electrode will not come
into contact with the potential sensor cover.
6-52
F06-207-08
[2]
F06-207-09
COPYRIGHT© 2001 CANON INC.
[1]
[1]
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001