Canon iR8500 Service Manual page 772

4 SORTER
4.1 ADJUST
PNCH-HLE
Use it to adjust the punch hole position (in paper feed direction) when the
puncher unit is in use.
Memo
Range of
adjustment
-23 to 23 (1 being equal to about 0.5 mm)
<Using the Mode>
1) Make a print of the Test Chart, and check the hole position.
2) Select the item, and charge the setting to adjust.
3) Press the OK key.
4) Make a test print of the Test Chart, and check to make sure that the hole
COPYRIGHT© 2001 CANON INC.
A higher setting shifts the punch hole toward the leading edge (paper
middle).
position is as indicated.
(feed direction)
2000 2000 2000 2000
Paper
Higher setting
F00-401-01
CANON iR8500/7200 REV.1 AUG. 2001
SERVICE MODE
SORTER>ADJUST
Lower setting
S-129