Canon iR8500 Service Manual page 348

No.
3 While holding down the front and rear of
the transfer/separation charging assembly
[1], pull it by 1 cm toward the front; then,
detach it toward the upper left.
Using alcohol, clean the transfer/
separation charging wire.
4 While keeping the following in mind,
mount the transfer/separation charging
assembly:
• The solvent must completely be dry.
• The gut wire must not be brought into
contact with the transfer guide [1] to
avoid a cut.
• The grounding plate [2] must be on the
outside of the charging assembly frame
[3] (See the figure).
5 Connect the connector of the transfer/
separation charging assembly, and mount
the fixing.
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[1]
F04-305-03
[1]
F04-305-04
[3]
[2]
F04-305-05
4-47