CHAPTER 2 NEW FUNCTIONS
3.9.13 Removing the Fuse PCB
1) Remove the reader rear cover (See
10.4.1.h.).
2) Remove the three screws [1], and free
the fuse PCB base [2] from the ADF
mounting plate.
3) Disconnect the connector [1], and free
the harness from the edge saddle [2];
then, draw out the fuse PCB base [3]
farther.
4) Remove the screw [1], and disconnect
the three connectors [2]; then, detach
the fuse PCB [3].
2-70
COPYRIGHT © 2001 CANON INC.
[1]
F02-309-24
[1]
F02-309-25
[2]
[2]
[3]
[1]
[2]
F02-309-26
2000 2000 2000 2000
CANON iR8500/7200 REV.1 AUG. 2001
[2]
[2]
[3]