Canon iR8500 Service Manual page 182

e. Adjusting the Height of the Charging Wire
Charging assembly
Primary
Pre-transfer
Separation
Transfer
The height (position) of the primary and transfer charging wires may be ad-
justed by turning the screw found at the rear of the charging assembly. A
REF.
full turn of the screw changes the position of the charging wire by about 0.7
mm.
COPYRIGHT© 2001 CANON INC.
- 0mm
7.5
+3mm
17.0±0.2mm
F02-709-19
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
Height of charging wire
No height adjusting mechanism
13.6 ±0.3mm
- 0mm
7.5
+3mm
15.5±0.2mm
2-127