Removing The Pickup Assembly 1 - Canon iR4570 Series Service Manual

Chapter 8
1) Open the right door [1] of the pedestal (if a 2-
Cassette Pedestal-Y1 is installed).
2) Open the lower right cover [2].
3) Remove the 2 screws, and detach the right cover
(lower front) [3].
F-8-118
8.8.4.5 Removing the Pickup
Assembly 1
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Slide out the cassette 1/2.
2) Disconnect the 3 connectors [1]; then, free the
harness from the 2 wire saddles [2] and the 2
clamps [3].
F-8-119
3) Remove the 4 screws [1], and take out the pickup
unit 1 [2].
8-78
[2]
[3] [1]
0007-6564
F-8-120
8.8.4.6 Removing the Pickup
Assembly 2
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Slide out the cassette 1/2.
2) Disconnect the connector [1], and free the harness
from the guide; then, remove the 4 screws [2], and
detach the pickup assembly 2 [3].
F-8-121
8.8.4.7 Removing the Sensor
Mounting Plate
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Remove the 2 TP screws [1] and the binding screw
[2] from the rear of the pickup assembly, and detach
the bracket [3].
0007-6565
0007-6567