Canon iR8500 Service Manual page 770

3.3 FUNCTION
SENS-INT
Use it to adjust the sensitivity of each sensor of the ADF.
<Using the Mode>
1) Select the item, and press the OK key.
2) See that the machine stops automatically after making adjustments.
BLT-CLN (Indicated if iR8500)
Use it to clean the separation belt of the ADF.
<Using the Mode>
1) Select the item, and press the OK key.
2) See that the separation belt goes ON. Press the Stop key to stop it.
REG-CLN (Indicated if iR8500)
Use it to clean the registration roller of the ADF.
<Using the Mode>
1) Select the item, and press the OK key.
2) See that the registration roller starts to rotate. Press the Stop key to stop
COPYRIGHT© 2001 CANON INC.
Be sure to clean the sensor before executing the mode.
it.
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
SERVICE MODE
FEEDER>FUNCTION
S-127