Canon iR8500 Service Manual page 253

CHAPTER 2 NEW FUNCTIONS
b. Removing the Curl-Reducing Fan (FM6)
1) Remove the fixing/feeding unit cover
(See 10.4.1.d.).
2) Disconnect the 4 connectors [1], and
remove other 4 screws [2]; then, detach
the fixing motor base [3].
3) Remove the 2 screws [1], and discon-
nect the 2 connectors [2]; then, detach
the delivery speed switching clutch [3].
When removing the delivery
speed switching clutch, take
care not to lose the bearings and
the washers (rear only) on both
ends of the clutch shaft.
4) Disconnect the connector [1], and re-
move the 2 screws [2]; them, detach the
curl-reducing fan [3].
2-198
COPYRIGHT© 2001 CANON INC.
[1]
[2]
[2]
F02-1004-35
[1]
[1]
[3]
F02-1004-36
[2]
[1]
F02-1004-37
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
[3] [1]
[2]
[2]
[3]
[2]