Canon iR8500 Service Manual page 267

CHAPTER 2 NEW FUNCTIONS
a. Removing the DC Controller PCB
1) Remove the rear cover (See 10.4.1.e.).
2) Disconnect all connectors of the PCB,
and remove the 4 screws [1]; then, de-
tach the DC controller PCB [2].
2-212
COPYRIGHT© 2001 CANON INC.
[2]
F02-1004-63
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
[1]
[1]