Canon iR8500 Service Manual page 372

No.
6 Remove the 2 screws [1], and detach the
face plate.
7 Secure the network PCB [1] in place using
the 2 screws [2] used to fix the face plate
in place.
Check to make sure that the
connector has been fully
inserted.
8 Push in the main controller box that has
been slid out in step 5, and secure it in
place using 4 screws.
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[1]
F04-701-06
F04-701-07
[2]
[1]
[2]
4-71