Table of Contents
Advertisement
CF5001 Field Service Ver.1.0 Sep 2003
7.5
Running test mode
Conduct a test while in the continuous copy opera-
tion.
Select [4. Running test mode] in the 36 mode menu
screen to show the running mode menu screen.
For this adjustment, the following items can be
selected:
A. Intermittent copy mode
After completion of the copy operation for the set
copy count, the copier changes into the copy ready
state and waits for 0.5 sec. before resuming the
same operation.
B. Paperless running mode
Without detecting paper or jam, the copy operation
is made nearly at the same timing as the normal
copy operation. In the same manner as the intermit-
tent copy mode, after completion of the copy opera-
tion for the set copy count, the copier changes into
the copy ready state and waits for 0.5 sec. before
resuming the same operation.
C. Paperless mode
Without detecting paper or jam, the copy operation
is made nearly at the same timing as the normal
copy operation.
D. Paperless endless mode
The copier operates with the copy count infinitely
set automatically. In the same manner as the paper-
less mode, without detecting paper or jam, the copy
operation is made nearly at the same timing as the
normal copy operation.
E. Running mode
The copy operation is made in the paperless end-
less mode plus the scanner each-time scan and the
auto paper feed tray switching.
7.5.1 Setting method
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [4. Running test mode] key.
3. "Running test mode menu screen"
Press the mode key of one of the modes 1 to 5.
4. "Basic screen"
Press the [Start] key.
5. After confirmation of the copy operation, press
the STOP button and turn OFF the main switch
(SW2).
2-95
36 MODE
Advertisement
Table of Contents
