Table of Contents
Advertisement
FN-9/FN120 Ver.1.0 Sep 2003
4. STACKER
4.1
Replacing
assist roller
A. Periodically replaced parts/cycle
• Stacking assist roller: Every 400,000 copies
B. Procedure
1. Open the finisher door.
2. Pull out the stacker unit.
3. Open the stacking assist section [1] and lift up
the stacking assist roller [2].
4. Remove the stop ring [3], and then remove the
stacking assist roller [2].
5. Reinstall the above parts following the removal
steps in reverse.
4.2
Removing and reinstalling of
the stacker unit cover
A. Procedure
1. Open the finisher door.
2. Remove 5 screws [1] and then remove the
stacker unit cover [2].
3. Reinstall the above parts following the removal
steps in reverse.
the
stacking
1-175
[3]
[2]
[1]
[1]
fs2153031
[2]
fs2153032
Advertisement
Table of Contents
