Sharpness Adjustment - Konica Minolta CF5001 Service Manual

CF5001 Field Service Ver.1.0 Sep 2003
11. Enter one less numeric value than the current
and press the [SET] key.
• Setting range: -3 to +1
12. Repeat steps 6 to 11 until the tone jump disap-
pears.
13. Press the [PREVIOUS SCREEN] key to return
to the "Printer gamma adjustment menu
screen."

7.4.3 Sharpness adjustment

Conduct the sharpness adjustment or, this is car-
ried out when moire reproduced.
Use this adjustment for changing the center value
for the sharpness adjustment in the user mode.
A. Procedure
1. Enter the 36 mode.
2. "36 mode menu screen"
Press the [3. Image quality adjustment] key.
3. "Image quality mode menu screen"
Press the [3. Sharpness adjustment] key.
4. "Sharpness adjustment menu screen"
Press the [COPY SCREEN] key.
5. Select the A3 or 11 x 17 paper and press the
START button with a test chart set to the origi-
nal glass.
6. Press the C button while pressing the P button.
7. Enter a numeric value through the numeric
keys as necessary, and press the [SET] key.
• Setting range: -5 (soft/less moire) to +5 (sharp/
more moire)
8. Repeat steps 4 to 7 until it becomes suitable.
9. Press the [PREVIOUS SCREEN] key to return
to the "Image quality mode menu screen."
2-87
36 MODE