Table of Contents
Advertisement
25 MODE
6.5
PM count setting
Reset the PM count after implementation of the PM
and set and/or change the PM cycle.
The selection of the PM cycle is available in the
total count and the distance in operation of the
developing unit /K. In default, the total count is set.
6.5.1 Count reset
A. Procedure
1. Enter the 25 mode.
2. "25 mode menu screen"
Press the [3. PM count] key.
3. "PM count/cycle screen"
Press the [Count reset] key.
4. "PM count reset confirmation screen"
Press the [YES] key when resetting the PM
count. The PM count is reset and the starting
date of the PM count is automatically entered.
When the [NO] key is pressed, the PM count is
not reset and return to "PM count/cycle
screen."
CF5001 Field Service Ver.1.0 Sep 2003
6.5.2 Change setting
A. Procedure
1. Enter the 25 mode.
2. "25 mode menu screen"
Press the [3. PM count] key.
3. "PM count/cycle screen"
Press the [Page] or [Distance] key.
4. Enter a cycle value through the numeric keys.
Only the upper three digits can be entered.
5. Press the [OK] key to return to "25 Mode menu
screen."
To invalidate the setting that you have
changed, press the [CANCEL] key and return
to "25 mode menu screen."
2-26
Advertisement
Table of Contents
