Conveyance; Replacing The Paper Exit Roller /A (Sponge Roller) - Konica Minolta CF5001 Service Manual

FN-9/FN120 Ver.1.0 Sep 2003

2. CONVEYANCE

2.1 Replacing
roller /A (sponge roller)
Caution:
• After you have lowered the main tray, be sure
to unplug the power cord of the main body
from the power outlet.
A. Periodically replaced parts/cycle
• Paper exit roller /A (sponge roller): Every
250,000 copies.
Note:
• When replacing the sponge rollers, all of the 5
pairs (10 components) must be replaced.
B. Procedure
1. Push up the actuator [1] of the tray upper limit
sensor (PS702) with your finger, and lower the
main tray [2].
2. Turn off the main switch (SW2) of the main body
and unplug the power cord of the main body
from the power outlet.
the paper exit
1-165
[1]
[2]
fs2153011